water chiller

1. Brief Introduction SML series Cooling Water Machine are developed from advanced technology home and abroad, it is mainly suitable for cooling plastic mould and injection oil tank, reduce the circulation time through high-speed cooling, to that to improve the work efficiency and plastic product quality. At the same time, it is the essential cooling equipment for hotel, department, film, hospital workshops and the concentrated air-conditioner at the high building. This series water chiller adopts imported name brand compressor (mainly with French and American Bristol) and independent cooling system composed with several compressors. This series heat-exchanger adopts sheet, coil heat or tube exchanger, and it is small in shape, high in efficiency. The cooling equipment is matched with automatic temperature indicator, and it can control the temperature accurately. The water chiller also adopts such protector as high/ low pressure, water-cut and motor overload etc. The Cooling Water Machine can be installed at the workshop automatically, compact in structure, good in appearance, convenient in use and can wave energy. To assure the normal condition of the water chiller, please read the manual carefully before operating. The model supplied by Zhangjiagang Second Light Industry Machinery Co.,Ltd is as follows: 1) The cooling mode of condenser: wind-cooling 2) Machine type: Single cooling 2. Main Technical Parameters Model SML-4F Temperature control 5-30 Power 440V 60HZ Evaporator R22 Cooling capacity(kcal/h) 15000Kcal/h Compressor (Hp) 5Hp Rating power(A) 20A Pump flux(m3/h) 6.3m3/h Pump power(kw) 1.1kw fan power(kw) 0.75kw Compensator pipe(inch) 1 Machine Weight (kg) 250kg Security protector: Protector of compressor overload, electricity, high/low pressure, stopping water, temperature, freezing 3. Features: (1) Imported closed compressor was applied, better efficiency and better refrigeration. (2) The value board style heat change appliance was made in Sweden; its brand is AFAR. (3) RKC instrument made in Japan was applied; the temperature was controlled accurately. (4) ALCO brand refrigeration is made in USA, to assure the operation. (5) High automation degree, tight structure, good appearance, easy to operate energy saves. Cooling Water Machine is mainly suitable for cooling plastic mould and injector fuel tank, through rapidly cooling, it will shorten the cycle time of operation so as to raise productivity and improve plastics quality. It also serves as a necessary refrigerating device for computerized tomography machine (CT) in hospital, chemical reaction pool, precision instrument workshop and etc.